Machine Specifications:

  • This machine uses two rolls of cold seal material to make the protective pouch
  • The lower web of the material runs over the infeed table and carries the product into the sealing portion
  • This is where the upper roll of material joins the product to form the protective pouch
  • The end seals and length cutoff are done simultaneously in the sealing head of the system
  • The machine uses pre-set length counters to regulate the package size
  • Machine operation and setup are done through the touch screen controller
  • This allows the operator to make adjustments quickly and easily
  • The system is available in 18" and 36" wide models
  • The maximum width and height through the machine varies by model
  • The 600-18 has a 5" hgh package capability
  • The 600-36 has an 8" high package capability
  • Length through the system is only limited by what can be supported on the infeed table
  • Most all cold seal materials can be run on the model 600, these include:
    • Corrugated
    • Polyethylene
    • Kraft Papers
    • Foams
    • Bubble

Download the Model 600 3-D Style Double Web Machine Literature

Machine Specifications:

  • Provides a compact work cell in order efficiently wrap and package virtually any products.
  • Uses pre-cut sheets of cohesive materials up to 20" wide
  • It runs on 110 V.A.C. and no air is required.
  • Some operators can make up to 250 packages per hour

Download the Model 200 Mini Sealer Brochure

Machine Specifications:

  • This machine uses a single roll of cold seal material to make the protective pouch
  • The unit scores and folds the material so that the product can be placed in the crease of the web
  • The sides are brought up and around the product and sealed above
  • The end seals and length cutoff are done simultaneously in the sealing head of the system
  • The machine uses pre-set length counters to regulate the package size
  • Machine operation and setup are done through the touch screen controller
  • This allows the operator to make adjustments quickly and easily
  • The system is available in 12" and 18" high models
  • The maximum width through the machine is 3.5"
  • Lengths up to 48" can be ran on a standard system
  • Modifications can be made to run excessive length packages as well
  • Most all cold seal materials can be run on the model 800, these include:
    • Corrugated
    • Polyethylene
    • Kraft Papers
    • Foams
    • Bubble

Machine options include, but are not limited to the following:

  • Pneumatic spindle roll stands, for quick material change over
  • Power unwind units for certain cohesive materials
  • Extended infeed tables and exit conveyors
  • Double stop option is available for easy loading of longer products
  • Fold over opening device
  • Print and apply label applicators
  • Roll printers or coders

Download the Model 800 Brochure

Machine Specifications:

  • This machine uses two rolls of cold seal material to make the protective pouch
  • The lower web of the material runs over the infeed table and carries the product into the sealing portion which is where the upper roll of material joins the product to form the protective pouch
  • The end seals and length cutoff are done simultaneously in the sealing head of the system.
  • The machine uses pre-set length counters to regulate the package size
  • Machine operation and setup are done through the touch screen controller which allows the operator to make adjustments quickly and easily
  • The system is available in 12, 18, 24 and 36" wide models
  • The maximum width and height through the machine varies upon model
  • The 900-12 has a 2.5" high package capability
  • The 900-18 and the 900-24 have a 5" high package capability
  • While the 900-36 and the 900-24-8 have a 8" high package capability
  • Length through the system is only limited by what can be supported on the infeed table
  • Most all cold seal materials can be run on the model 900, these include:
    • Corrugated
    • Polyethylene
    • Kraft Papers
    • Foams
    • Bubble

Machine options include, but are not limited to the following:

  • Pneumatic spindle roll stands, for quick material change over
  • Power unwind units for certain cohesive materials
  • Extended infeed tables and exit conveyors
  • Double stop option is available for easy loading of longer products
  • Fold over opening device
  • Perforators for easy open packages
  • Barcode scanners
  • Print and apply label applicators
  • Roll printers or coders

Download the Model 900 Brochure

Machine Specifications:

  • The 9000 measures the length of the product and makes a package accordingly
  • The standard system comes with either a flited/lugged infeed conveyor or a belted infeed conveyor
  • This machine uses two rolls of cold seal material to make the protective pouch
  • The infeed conveyor carries the product to the sealing head where both rolls of material come together to form the protective pouch
  • The end seals and length cutoff are done simultaneously in the sealing head of the system
  • Machine operation and setup are done through the touch screen controller which allows the operator to make adjustments quickly and easily
  • The system is available in 12, 18, 24 and 36" wide models
  • The maximum width and height through the machine varies upon model
  • The 900-12 has a 2.5" high package capability
  • The 900-18 and the 900-24 have a 5" high package capability
  • The 900-36 and the 900-24-8 have a 8" high package capability
  • Product lengths on a flited infeed is limited by the flite spacing (17" O.C. typical)
  • Products lengths are unlimited for the belted infeed models
  • Most all cold seal materials can be run on the model 900, these include:
    • Corrugated
    • Polyethylene
    • Kraft Papers
    • Foams
    • Bubble
  • The standard system has a 8' infeed table and a 3' exit conveyor
  • It uses 110 V.A.C. and 80 P.S.I.
  • The unit can run packages up to 35 packages per minute
  • Machine supplied with standard roll holders

Machine options include, but are not limited to the following:

  • Pneumatic spindle roll stands, for quick material change over
  • Power unwind units for certain cohesive materials
  • Extended infeed tables and exit conveyors
  • Double stop option is available for easy loading of longer products
  • Fold over opening device
  • Perforators for easy open packages
  • Pneumatic spindle with both rolls mounted in the rear
  • Barcode scanners
  • Print and apply label applicators
  • Roll printers or coders

Download the Model 9000 Brochure

Go to top
Template by JoomlaShine